The ALTO TS410 Powered Speaker stands out for its extraordinary sound power and promises you a much clearer sound with advanced Bluetooth features such as streaming, speaker pairing as well as app control. By downloading the free Alto app, you will be able to remotely control your speaker setup including custom EQ and sub-size selection. 

The TS410 Bluetooth active speaker also incorporates a 3-channel speaker including 2 Mic/Line input channels with XLR/6.3 mm combo jacks that can be used with line level signals, plug in microphones and instruments. In order to offer you a greater variety of uses, Alto includes Bluetooth connectivity allowing you streaming and making it easier to pair your smartphone, tablet and laptop. 

In addition, with the intention of optimizing the TS4 speaker for any type of application, 3 predefined DSP modes are integrated allowing you to receive more than exceptional sound each time you press this button. button. In short, whether you need a speaker for a Karaoke night, for a speech, for the atmosphere in a club or at a party, this one will fill the room with breathtaking sound every time you use it.

Features:

Remote control and configuration available by downloading the Alto app for free (iOS/Android)

Stream with built-in Bluetooth connectivity

Built-in DSP digital signal processor with 4 speaker modes (including custom EQ via app)

Ability to pair speakers with True Wireless Stereo using Bluetooth

Integrated 3-channel mixer with 2 XLR 6.35mm combo inputs, mic/line switches and independent level controls

XLR mix output

10-inch low-frequency driver with a 50mm high-temperature voice coil

1-inch ceramic high frequency driver with 35mm voice coil

Lightweight case for easy transport

Can be mounted on a pole or suspended with integrated M10 suspension points

Powerful and efficient Class D amplifiers with a fanless cooling system design

Specifications:

Total power: 2000 W

Low frequency driver size: 10 inch with 2.0 inch (50 mm) high temperature voice coil

Bass Driver Power: 1 x 650 W RMS into 2 Ohms

Hi-Frequency Driver Size: 1.0 in ceramic with 1.4 in (35mm) voice coil

Treble driver power: 1 x 350 W RMS at 4 Ohms

Crossover frequency: 2 kHz

Peak SPL: 130 dB (dB-SPL at 1 m)

Continuous SPL level: 127 dB (dB-SPL at 1 m)

Frequency response: 57 Hz - 20 kHz (+/-3 dB)

Frequency range: 48 Hz - 20 kHz (-10 dB)

Horn speaker coverage: 90° horizontal x 60° vertical (nominal)

Connectors: 2 combined XLR+1/4 in (6.35 mm) TRS inputs (balanced) and one XLR output (link)

Input impedance Line: 10 KOhms balanced, 20 KOhms unbalanced, Microphone: 1.2 KOhms

Line gain/volume control range: -8 to 0 dB, +4 dBu nominal, +10 dBu for maximum output

Gain/volume control range for microphone and instrument: -8 to +50 dB

USB Charging Port: 5V 2.1A

Controls: Power switch, 2 gain control knobs, 2 mic/line switches, Bluetooth volume control encoder, pairing button, stereo link button, sub-size button, speaker operation button speaker

Indicators: One input channel signal/limit/clip LED (green = Ch1/2 signal) (yellow = Ch1/2 limiter) (red = Ch1/2 output clipped), One Bluetooth LED (blue), One LED link (orange), four DSP preset LEDs (green), three HPF LEDs (green)

Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz

Consumption: 900 W

Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V

Protection: Electronic clip, thermal protection and transducer overload protection

Housing: Injection molded housing and perforated metal grille

Mounting/Installation: Standard 36mm power socket, pendant application, suspended with integrated M10 points or in a corner monitor position

Dimensions: 536 x 320 x 317 mm (21.1 X 12.6 X 12.5 in)